logo  print   close
Maintenance
 
thumbnail-arrosoir thumbnail-poche  
How to fill the water reservoir Exchange a substrat bag  
  • ALWAYS maintain the water level in the reserve
  • Conserve between 15°C and 25°C
  • Lots of light
  • Do not expose to a source of heat (Air conditioner, heater, light bulbs)

arrow First installation :

The Wallflower™ organic artwork is delivered with the necessary tools to :

  • Hang it up on the wall: to do this, fix the bracket (supplied with the user manual carton) to the wall in a horizontal position. The frame can be fixed onto the runners of this bracket (2 brackets are required for the medium size frame, 4 for the large size frame).
  • place it on a piece of furniture (table, office desk, cabinet). The same bracket can be clipped onto the back of the frame to stabilise the frame on 3 different heights (like a photo frame).Once you have found the ideal position for your frame, you will need to fill the water reserve, especially during the first two days, to allow for the pouch to rehydrate sufficiently. Thereafter, a signal located on the side of the frame will indicate when you need to replenish the water reserve. How often you will need to refill the reserve depends on the season, the exposure to light and the temperature of the surrounding interior space.

arrow The watering procedure :
schema

How to fill the water reservoir ?

Behind each frame (if you look at the frame from the front, it is on the bottom left), an indicator shows the water level remaining in the reservoir :

water-reservoir-empty   1. when this is empty, two half moons appear: you need to fill the reservoir. water-reservoir-full   2. when it is sufficiently full, a complete circle appears: the plants do not need more water. Stop watering when you see the complete circle, or the water will overflow.

arrow Exchange a substrat bag :

To exchange a WALLFLOWER™ substrate pouch, you need to:

  • empty the water from the water reservoir
  • place the frame in front of you in an upright position
  • open the lid on top of the plastic container
  • unhook the WALLFLOWER™ substrate bag you’d like to replace,then let it fall to the bottom of the container
  • lay the frame flat
  • gently pull out the substrate bag from the front of the frame
  • turn the frame 180°, so that the water reservoir is facing away from you (upside down frame)
  • take the new WALLFLOWER™ substrate bag and gently insert it into the front of the frame, the top of the bag (with the hooks) must be on your side
  • insert the cotton wick into the bottom of the water reservoir
  • place the frame upright
  • hook the bag into the top of the frame
  • close the lid of the plastic container
You have successfully replaced the substrate bag: you now have new WALLFLOWER™ plant art!

schema contre-indications